Zinsser Cover Stain Primer Instructions
Zinsser Cover Stain Primer Instructions. Remove interior mildew with an interior mildew cleaner. Oil base flat white interior/exterior primer and sealer sticks to any surface without sanding.
Remove interior mildew with an interior mildew cleaner. Destroy exterior mildew with zinsser house cleaner and mildew killer. Zinsser cover stain works well as an adhesion primer in certain situations.
Zinsser High Hide Cover Stain 1 Gal.
Use it to block stains, hide dark colors, prevent tannin bleed and penetrate and seal exterior wood. Zinsser cover stain the adhesion primer. Zinsser cover stain 1 gal.
Any Fast Drying Product Should Not Be Used For Brush Applications On Bare Wood, As The Product Has No Time To Level.
Low odour, water based formula. Cover stain is a good stain blocker that usually seals surfaces in one coat, but on oak. Allow surface to dry completely before priming.
For Interior And Exterior Use.
Make sure you ventilate the room as well as you can because although it is nowhere near the level of pliolite, it does stink. Zinsser cover stain primer/sealer 13oz spray prime and fill all nail holes and gouges with zinsser ready. A waterbased primer will dry slower but will raise the grain.
As Much Of The Stain As Possible By Washing, Sanding, Scraping, Etc.
Use it to block stains, hide dark colours, prevent tannin bleed and penetrate and seal exterior wood. Ready to recoat in 1 hour. Blocks cedar and redwood bleed.
Allow Surface To Dry Completely Before Priming.
Seals stains, graffiti and tannin bleed. Sticks to surfaces without sanding. To find out how easy it can be watch our video below our follow these step by step instructions!
Post a Comment for "Zinsser Cover Stain Primer Instructions"